 |
 |
|
|
 | |
|
Tel: |
0086-769-87097229 |
 | |
|
Fax: |
0086-769-87097239 |
| |
|
contact: |
Mr Fang /Mr Liu |
| |
|
E--mail: |
hyft@dghyft.cn |
| |
 | |
|
| |
|
|
|
Saturated carboxyl polyestes Resin HY-5201 HY-5202 General dascription HY-5201 Hy-5202 is a saturated carboxy-polyester resin speidized for powder coatings.The polyesters type powder coating may be produced by combining this resins with TGIC(93:7)and the coatings film will be ploessed of high gloss.Very good mechanical propeties out door durability.HY-5201 is saturated carboxyl polyester resin for applications of Polyester/TGIC powder coating system. | |
| Specifications | |
| Appearance: | HY-5201 HY-5202 |
| Light yellow solid granule | |
| Colour (50％DMF solution): | ≤4 ≤4 (ASTM D 1544) |
| Acid value (mg KOH/g): | 35+2 35+3 (ASTM D 1613) |
| Softening point℃ | 112+1 117+3 (ball and ring) |
| Vitrifilcation point℃ | 65+1 67+1 (ASTM D 3418) |
| ICI Viscosity(at200℃ pa s) | 0.35-0.45 0.5-0.6 (ASTM D 4287) |
| Recommend Formulation | |
| Polyester resin | 60％ (HY-5201 or HY-5202) |
| Epoxy resin | 5 (HY-TGIC) |
| Levelling agent | 1 (HY-L1000) |
| Titanium dioxid | 20 |
| Barium sulfate | 13.7 |
| Benzion | 0.3 |
| Baking condition | 200℃/10min 200℃/15min |
| Extrusion conditions | |
| APV Tow-screw extruder | |
| Speed of revolution | 500-1200rpm |
| Kneader casing temperature℃ | 110-130 |
| Fineness of powder | ≤100um |
| Application condition | |
| Electrostatic spraying Vith | 40-60kv |
| Coationg film thickness | 65-85nm |
| Pretreating with zinc phosphate | |
| Properties Gel time(180dec,sec): |
180-270(HY-5201); 240-330(HY-5202) |
| Gloss(60°): | ≥90％ |
| Bending(Φmm): | pass |
| Adhesive(1mm grade) | 0 |
| Pencil hardness | ≥1H |
| Impact(direct reserve) | pass50kg cm |
| Storage test(40℃,24hr) | good |
| Weather ability | |
| QUV A340 1000hr: maintenance gloss: | ≥80％ |
| QUV B3B 240hr: maintenance gloss: | ≥80％ |
| Package and Storage | |
| Packaging with PE lined paper bage,Net weight 25kg per bag.stored in dry and well ventilated place under temp 30℃ for 1 year. | |
| Dongguan rde leaves coating material limited company Copyright(c) visitor:
Technical support: zhonghua qiye wang |
